Abbott CELL-DYN 3000, Руководство оператора

Страница: 377 / 542

8-4
CELL-DYN

3000 System Operator’s Manual
9140240E — May 1995
Precautions, Limitations and Hazards Chapter 8
Decontamination Procedures
• Perform the Auto-Clean procedure. This procedure flushes all of
the fluid pathways with reagents to purge any waste from the fluid
pathways. (The open sample aspiration probe and the SL or CS
needles are automatically rinsed after every cycle.) The surfaces of
the instrument should be wiped with a nonabrasive detergent
solution to remove any soiling. This should be followed with a
wipe with a 10% chlorine bleach solution.
• If the instrument is to be shipped, it must be decontaminated prior
to shipment. Refer to the instructions given in the
Preparation for
Inactivity or Shipping procedure in the Special Procedures section
of Chapter 9, Maintenance .
Blood Samples
• Decontaminate and dispose of all specimens and potentially
contaminated materials in accordance with local, state and federal
regulations.
• Waste liquid is a possible source of biological and chemical hazard.
Handle with extreme care during the disposal process.
• Refer to the Sample Collection and Handling section in Chapter 5,
Operating Instructions , for precautions and limitations pertaining
to sample collection and handling. This section also includes
information on interfering substances.
Spills
Clean up spills of potentially infectious materials in accordance with
established biosafety practices. A generally accepted procedure for clean
up of such spills is to absorb the spill with toweling or other absorbent
material, wipe the area with a detergent solution and then wipe the area
with an appropriate tuberculocidal agent such as 10% chlorine bleach.
Search Book TOC Go Back