manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 158

CELL-DYN

 3000 System Operator’s Manual 

5-29

9140240E — May 1995

Chapter 5 Operating Instructions

CNT1 and CNT2 — CNT1 is the RBC/PLT Count Time. CNT2 is 

the RBC/PLT Count Time for an extended 
count.

The [STANDARD SELECTION] key is used to automatically arrange 
the parameters in a predetermined print group.

Procedure Customize QC Log Printout

1.

Select a file from the

 QC SETUP MENU Screen

 by moving the 

cursor to the desired file.

2.

Press [CUSTOMIZE PRINTOUT] to display the 

CUSTOMIZE 

QC PRINTOUT Screen

 for the selected file.

3.

Use the Arrow keys on the keyboard to move the cursor to the 
desired parameter in the list under the printout group.

4.

Press [SELECT PARAMETER]. The selected parameter is 
highlighted and the cursor moves to the first position in the group.

NOTE:  The key label changes to [PLACE PARAMETER] 
and a [CANCEL SELECTION] key is displayed.

5.

If necessary, use the Arrow keys on the keyboard to move the 
cursor to the desired location and press [PLACE PARAMETER].

NOTE:  When the [PLACE PARAMETER] key is pressed, the 
selected parameter is displayed in the position indicated by the 
cursor and the cursor then advances to the next parameter in the 
list under the printout group.

6.

Repeat steps 3–5 until all entries have been made.

7.

If desired, press the Print Screen key on the keyboard to obtain a 
printout of the configuration.

8.

Press [RETURN] to return to the 

QC SETUP MENU Screen.

9.

Repeat this procedure to customize the printout for other QC logs.

When the [STANDARD SELECTION] key is pressed, the parameters 
are automatically arranged in the predetermined print group shown in 

Figure 5.14

.

STANDARD

SELECTION

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды