manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 221

5-92 

CELL-DYN

 3000 System Operator’s Manual

9140240E — May 1995

Operating Instructions Chapter 5

When a laboratory-generated bar code number is used (Laboratory 
Specimen ID option selected in the Work List Set Up), this number must 
be typed in the Work List <SPECIMEN ID> field. The samples are 
identified on the 

Data Station RUN Screen

 and in the Data Log by this 

number.

When a CELL-DYN 4-digit bar code label is used (4-digit bar code 
option selected in the Work List Set Up), the 4-digit number must be 
entered in the Work List <4-DIGIT BAR CODE> field, and a specimen 
ID number must be entered in the Work List <SPECIMEN ID> field. 
Samples are identified on the 

Data Station RUN Screen

 and in the Data 

Log by the information entered in the Work List <SPECIMEN ID> field 
for that 4-digit bar code number.

The Work List is accessed randomly as the samples are processed. 
Sample identification is made by matching the bar code number on the 
tube to the information entered in the Work List for that bar code number. 
The Work List information is used to identify the sample on the 

Data 

Station RUN Screen

 and in the Data Log.

NOTE:  Special “Q Labels” are available to identify QC 
samples. QC samples should not be entered in the Work List. 
The Q label identifies the sample as a QC sample and the results 
are automatically transmitted to the appropriate file.

Sample Analysis Procedure

1.

Follow the instructions in the 

Work List Set Up Procedure

 to 

configure the Work List.

2.

If necessary, from the main

 WORK LIST Screen

, press [WORK 

LIST ON] to enable the Work List.

3.

If necessary, press [BAR CODE ON] to enable the bar code 
function.

4.

When a laboratory-generated bar code label is used, the bar code 
number must be entered in the <SPECIMEN ID> entry field.

NOTE:  When the CELL-DYN 4-digit bar code label is being 
used, type the number in the <4-DIGIT BAR CODE> entry 
field. When data entry is completed for the entry fields on that 
line and the Enter key is pressed, the cursor returns to the next 
<4-DIGIT BAR CODE> entry field and the number 
automatically increments by one digit. The cursor remains in this 
field until the Enter key is pressed again to save the entries and 
advance the cursor.

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды