manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 173

5-44 

CELL-DYN

 3000 System Operator’s Manual

9140240E — May 1995

Operating Instructions Chapter 5

The [CUSTOMIZE HEADER] key is used to customize the header for 
the graphics report. (See 

Figure 5.21

.) Any report printed in a graphics 

format will be printed with this header. The following soft key labels are 
displayed when the [CUSTOMIZE HEADER] key is pressed:

RESTORE HEADER

BLANK HEADER

CUSTOMIZE DISPLAY

CUSTOMIZE PRINTOUT

SETUP

The [BLANK HEADER] key is used to erase the current header.

The [RESTORE HEADER] key is used to restore the header to the 
previous entry. This key is only functional immediately after a new 
header has been entered. Once a new header is entered and the 

CUSTOMIZE PRINTOUT HEADER Screen

 has been exited, the 

previous header is removed from the memory.

Procedure Customize Graphics Header

1.

From any 

CUSTOMIZE PRINTED REPORT Screen

, press 

[CUSTOMIZE HEADER] to display the

 CUSTOMIZE

 

PRINTOUT HEADER Screen

.

2.

Type the desired number of lines for the header in the indicated 
field. The header can include up to four lines.

3.

Press the Enter key on the keyboard to save the entry and advance 
to the next entry field.

4.

Press [TOGGLE ON/OFF] to enable or disable the PRINT 
CURRENT DATE/TIME AND SOFTWARE VERSION option 
and advance the cursor to the next entry field.

5.

Type the information to be displayed on the first line of the header. 
Each line holds 77 characters. (Existing information may be typed 
over or an existing header may be deleted by pressing the [BLANK 
HEADER] key.)

NOTE:  The numbers displayed above the header box on the 
screen indicate the position of the header on the printed page. For 
example, centering the header/information under the number 4 
centers the header on the page.

CUSTOMIZE

    HEADER

    BLANK

    HEADER

  RESTORE

    HEADER

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды