Abbott CELL-DYN 3000, Руководство оператора

Страница: 239 / 542

5-110
CELL-DYN

3000 System Operator’s Manual
9140240E — May 1995
Operating Instructions Chapter 5
The [PLACE PARAMETER] key is used to display the parameter in
the location indicated by the position of the cursor.
The [CANCEL SELECTION] key is used to cancel the selection and
display the [SELECT PARAMETER] key.
The [STANDARD SELECTION] key is used to configure the printout
in the predetermined print group shown in
Figure 5.41 . When the key is
pressed, the print group is changed to the Standard Selection.
The [RETURN] key is used to return to the main DATA LOG Screen .
The [TRANSMIT DATA] key is used to transmit a record to a
Laboratory Information System or on-line computer. When the
[TRANSMIT DATA] key is pressed, the screen prompts the operator to
enter the starting and ending sequence numbers (from the lowest to the
highest) for the desired transmission. Records may be transmitted singly
or in batches as designated by the sequence number(s).
The [PRINT DATA LOG] key is used to print the Data Log. When the
[PRINT DATA LOG] key is pressed, the screen prompts the operator to
enter the starting and ending sequence numbers (from the lowest to the
highest) for the desired printout. (See
Figure 5.42 .)
PLACE
PARAMETER
CANCEL
SELECTION
STANDARD
SELECTION
RETURN
TRANSMIT
DATA
PRINT
DATA LOG
Search Go Back Book TOC