manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 182

CELL-DYN

 3000 System Operator’s Manual 

5-53

9140240E — May 1995

Chapter 5 Operating Instructions

Data Station Run Screen

The Upper Left Corner of the 

Data Station RUN Screen

 for patient 

samples displays the following data entry fields on lines 1–5:

1.

NEXT ID This field is used to enter the ID number for the 

next sample to be run. (Up to 12 characters may be 
entered.) If the Auto Increment feature is active, 
AUTO is highlighted at the end of the field. Refer to 
the discussion in the 

Sample Identification

 section 

of the 

Sample Analysis

 section in 

Chapter 5

 for 

more information about this feature.

2.

PATIENT This field is used to enter the patient’s name or 

identification. (Up to 16 or characters may be 
entered.)

NOTE:  If "patient" is not the selected specimen type, then a 
different data entry field appears on line 2.

•

"Res RBC" replaces "PATIENT" when Resistant RBC is 
selected.

•

"QC Filename" replaces "PATIENT" when QC Specimen is 
selected. The number of runs in the QC file and total file 
space are displayed to the right of the type as in the 
following example: 31/120.

•

"Background" replaces "PATIENT" when Background is 
selected.

•

"ELEC BKGND" replaces "PATIENT" when Electrical 
Background is selected.

3.

SEX (M/F): These fields are used to enter the sex andDOB: --

/--/-- 

birth date of the patient. 

4.

Dr. This field is used to enter the name of the 

patient’s physician. (Up to 22 characters may be 
entered.)

XB:    If the XB analysis is enabled, the XB file status is 

displayed to the right of the <DR> entry field.

5.

PARAM:/ These fields display the number (1–4) of the 
LIMITS: Parameter and Limit sets that will be applied
 to the sample results.

NOTE:  The Parameter and Limit sets applied to the sample 
may be changed after the sample has been run. Refer to the 
description of the 

Data Log [EDIT SPECIMEN] key

 given in the 

“

Using the Data Log

” section of this chapter.

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды