manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 24

CELL-DYN® 3000 System Operator's Manual                                                                                                                                                    

3  

   

9140240E — May 1995

 

Abbott Instrument Warranty

For U. S. Customers Only

Abbott Laboratories warrants CELL-DYN 3000 Series Analyzers, sold 
by Abbott Sales Representatives (the "Instrument"), to be free from 
defects in workmanship and materials during normal use by the original 
purchaser. This warranty shall continue for a period of one (1) year, 
commencing twenty-one (21) days from the date of shipment to the 
original purchaser or until title is transferred from the original purchaser, 
whichever occurs first (the "Warranty Period").

If any defects occur during the Warranty Period, contact your 

Abbott 

Customer Support Center

 immediately and be prepared to furnish 

pertinent details concerning the defect, the Instrument model number 
and the serial number.

Warranty support is provided twenty-four (24) hours a day, seven (7) 
days a week for all CELL-DYN 3000 Series Customers.

This Warranty does not cover defects or malfunctions which:

1.

Are not reported to Abbott during the Warranty Period and within 
one week of occurrence

2.

Result from chemical decomposition or corrosion

3.

Are caused by customer or third party abuse, misuse, or 
negligence, or by failure to comply with any requirement or 
instruction contained in the applicable Abbott Operator's Manual

4.

Result from maintenance, repair or modification performed 
without Abbott's authorization

Abbott's liability for all matters arising from the supply, installation, use, 
repair and maintenance of the Instrument, whether arising under this 
Warranty or otherwise, shall be limited solely to the repair or (at 
Abbott's sole discretion) replacement of the Instrument or any 
components thereof. In no event shall Abbott be liable for injuries 
sustained by third parties, incidental or consequential damages or lost 
profits. Replaced parts shall become the property of Abbott 
Laboratories.

The foregoing is the sole warranty made by Abbott Laboratories 
regarding the Instrument and Abbott specifically disclaims all other 
warranties, expressed or implied, including the implied warranties 
of merchantability and of fitness for a particular purpose.

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды