Abbott CELL-DYN 3000, Руководство оператора

Страница: 138 / 542

CELL-DYN

3000 System Operator’s Manual
5-9
9140240E — May 1995
Chapter 5 Operating Instructions
NOTE: The key label for the limit set displayed on the screen
is not shown.
Four different sets of limits may be entered. Whenever a parameter result
exceeds an entered limit, the result is displayed in color on the screen to
alert the operator. Results displayed in yellow are below the limit and
results displayed in magenta are above the limit. The flagged result is
underlined on the graphics report and the blank ticket report. The flagged
result is marked with an asterisk (*) on the pre-printed ticket report.
Procedure Patient Limit Sets
1. From the SETUP MENU , press [PATIENT LIMITS] to display
the PATIENT LIMITS Screen .
A Patient Limit Set is displayed on the screen. The set number
(Limit Set 1, Limit Set 2, etc.) is displayed in the Status Box. The
other limit sets may be selected by pressing the appropriate
soft key.
2. Use the Arrow keys on the keyboard to move the cursor to the
desired limit entry field and type the number.
3. Press the Enter key on the keyboard to save the entry and
automatically advance the cursor to the next entry position.
4. Repeat steps 2 and 3 until all desired entries have been made.
5. If desired, press [PRINT] to obtain a printout of the Limit Set.
NOTE: Retaining a hard copy of each Limit Set is
recommended, as the screens do not display names or categories
for the limit sets.
6. Press the appropriate soft key to select another Limit Set and repeat
steps 2–5 to enter the desired limits.
7. Press [RETURN] to return to the SETUP MENU Screen .
Search Go Back Book TOC