manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 199

5-70 

CELL-DYN

 3000 System Operator’s Manual

9140240E — May 1995

Operating Instructions Chapter 5

2.

An Auto Increment feature is available that automatically 
increments the sample ID number by 1 each time a sample is run. It 
is selected by moving the cursor to the word AUTO displayed at 
the end of the <NEXT ID> entry field. The [CHANGE 
SAMPLER] key changes to [TOGGLE AUTO ID]. Press the 
[TOGGLE AUTO ID] key to turn the feature ON or OFF. If the 
word AUTO is highlighted, the feature is enabled. Enabling this 
feature automatically increments the ID number after the first entry 
is made.

NOTE:  Up to 12 characters may be entered, but the auto 
increment feature is limited by the number of characters 
currently entered. The number changes to zeros when the 
maximum value is reached. For example, if a three-digit ID 
number is entered, the number changes from 999 to 000. If a 
five-digit number is entered, the number changes from 99999 to 
00000. Therefore, leading zeros should precede the number to 
maximize the use of this feature.

3.

The remaining patient demographic information may be entered at 
the operator’s discretion.

4.

The results are displayed and printed using Parameter set 1 and 
Patient Limit set 1 if no changes are made in these entry fields. 
When the results are displayed (but before the next sample is run), 
other parameter and limits sets may be displayed by moving the 
cursor to the appropriate field and typing the desired number.

NOTE:  When the results are stored in the Data Log, other 
parameter and limits sets may be selected by using the 

[EDIT

 

SPECIMEN]

 key. Refer to the 

Using the Data Log

 section of 

this chapter for complete instructions.

Alerts and Indicators

This section describes information displayed on the screen as the 
samples are analyzed and/or when reports are printed.

NOTE:  This section does not discuss how to interpret 
parameter flags, which are displayed after the sample is run. 
Refer to 

Chapter 3, Principles of Operation

, for detailed 

explanations of each flag.

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды