manualshive.com logo in svg

Abbott CELL-DYN 3000, Руководство оператора

Поделиться
Скачать
Abbott CELL-DYN 3000 Скачать руководство пользователя страница 136

CELL-DYN

 3000 System Operator’s Manual 

5-7

9140240E — May 1995

Chapter 5 Operating Instructions

The desired format is selected by typing the corresponding 
number in the entry field displayed to the left of the list (1). 
When the Enter key on the keyboard is pressed, the selected 
format is displayed in the <DATE> entry field (2) and the 
cursor moves to the entry position. After the date has been 
entered, the cursor moves to the <TIME> entry field (3).

Procedure Date/Time

1.

From the 

SETUP MENU Screen

, press [DATE/TIME] to display 

the

 DATE/TIME SETUP Screen

.

2.

Type the number of the desired format at the cursor.

3.

Press the Enter key on the keyboard to save the entry and advance 
to the <DATE> entry field.

4.

Type the date in the selected format using one or two digits. 
Separate the day, month and year with a slash (/) or a 
period (.). The entry order of the date should conform to the date 
format just selected.

5.

Press the Enter key on the keyboard to save the entry and advance 
to the <TIME> entry field.

6.

Type the time in the 24-hour (military) time format using one or 
two digits. Separate the hours and minutes with a colon (:) or a 
period (.).

7.

Press the Enter key on the keyboard to save the entry.

8.

Press [RETURN] to return to the 

SETUP MENU Screen

.

Search

Go Back

Book TOC

Содержание CELL-DYN 3000































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды