Thermo Scientific 5030i SHARP, Instruction Manual

Page: 106 / 403

Operation
Volumetric Conditions
3-44 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
HOST NAME:
CURRENT: ISERIES
I SERIES SSSSS ?
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
The Network Time Protocol (NTP) Server screen is used to edit the IP
address of the NTP server. An NTP server may be used to periodically
synchronize the instrument’s real-time clock with a standard. More
information about the NTP servers and a list of public servers may be
found at
http://www.ntp.org .
●
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings
> NTP Svr .
NTP SERVER IP ADDRESS:
CURRENT: 10.209.43.237
SET TO: 10.209.43.237 1
 MOVE CURSOR

CHANGE VALUE
 SAVE VALUE
RANGE AVG DIAGS ALARM
The I/O Configuration menu deals with configuration of the analyzer’s
I/O system. The analog input configuration is displayed only if the I/O
expansion board option is installed.
●
In the Main Menu, choose Instrument Controls > I/O
Configuration .
I/O CONFIGURATION:
>OUTPUT RELAY SETTINGS
DIGITAL INPUT SETTINGS
ANALOG OUTPUT CONFIG
ANALOG INPUT CONFIG
RANGE AVG DIAGS ALARM
The Output Relay Settings menu displays a list of the 10 digital output
relays available, and allows the user to select the logic state and instrument
parameter for the relay selected.
Network Time Protocol
Server
I/O Configuration
Output Relay Settings