Thermo Scientific 5030i SHARP, Instruction Manual

Page: 128 / 403

Operation
Alarms Menu
3-66 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
The alarms menu allows the user to view a set of alarms for different boards
and displays a list of items that are monitored by the analyzer. The number
of alarms detected is displayed to indicate how many alarms have occurred.
If no alarms are detected, the number zero is displayed.
If the item being monitored goes outside the lower or upper limit, the
status of that item will go from “OK” to either “LOW” or “HIGH”,
respectively. If the alarm is not a level alarm, the status will go from “OK”
to “FAIL”. The number of alarms detected is displayed to indicate how
many alarms have occurred. If no alarms are detected, the number zero is
displayed.
Items displayed are determined by the options installed. To see the actual
reading of an item and its minimum and maximum limits, move the cursor
to the item and press
.
If the readings go beyond either the minimum
or maximum limit, an alarm is activated and the alarm (bell) icon appears
in the status bar on the Run screen and in the Main Menu.
If any alarms are active, the alarm (bell) icon is displayed on the right side
of the status bar.
●
In the Main Menu, choose Alarms .
ALARMS:
ALARMS DETECTED 0
>INSTRUMENT ALARMS 0
DETECTOR ALARMS 0
NEPH ALARMS 0
RH/TEMPERATURE ALARMS 0

RANGE AVG DIAGS ALARM
PRESSURE/VACUUM ALARMS
FLOW ALARMS 0
CONC ALARMS 0
The Instrument Alarms submenu allows the user to view a set of alarms for
different boards. The filter tape change, heater power, and bench items
(motherboard, interface board and I/O expansion board) are read only.
The motherboard status, interface board status, and I/O expansion board
status (if installed) indicate that the power supplies are working and
connections are successful. There are no setting screens for these alarms.
●
In the Main Menu, choose Alarms > Instrument Alarms .
Alarms Menu
Instrument Alarms