Thermo Scientific 5030i SHARP, Instruction Manual

Page: 166 / 403

Operation
Password Menu
3-104 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
The Lock Instrument screen is used to lock the instrument’s front panel so
users cannot change any settings from the front panel. The lock instrument
screen is shown if the instrument is unlocked and the password is set.
●
In the Main Menu, choose Password > Lock Instrument
LOCK FRONT PANEL:
XXX PRESSING ENTER WILL XXXX
PREVENT USER FROM CHANGING
X CONFIG FROM FRONT PANEL XX
 LOCK AND RETURN TO RUN
RANGE AVG DIAGS ALARM
If the instrument is locked via the front panel using Password > Lock
Instrument , the instrument reports being in Remote mode. In this mode,
the front panel is “locked”, where data can be viewed, settings can be
viewed but not changed using the front panel interface, and the remote
“Set” commands are active.
If the instrument keyboard is unlocked via the front panel using Password
>
Unlock Instrument , the instrument reports being in Local mode, the
front panel interface is unlocked, and settings can be changed from the
front panel.
Refer to “ C-Link Protocol Commands ” appendix for detailed information
about “mode”, “allow mode”, and “power up mode” commands.
The Change Password screen is used to change the password used to
unlock the instrument’s front panel. The change password screen is shown
if the instrument is unlocked.
●
In the Main Menu, choose Password > Change Password
ENTER NEW PASSWORD:
R ANGXXXXXE
A BCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
Lock Instrument
Lock/Unlock and
Local/Remote Operation
Change Password