Thermo Scientific 5030i SHARP, Instruction Manual

Page: 113 / 403

Operation
Volumetric Conditions
Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual 3-51
Output Zero (0)% Value Full-Scale 100% Value
External Alarms 0 7,000
Neph Temp User-set alarm min value User-set alarm max value
Neph RH User-set alarm min value User-set alarm max value
Neph IRED User-set alarm min value User-set alarm max value
Neph Ref 350 2000
Beta Ref 0 65,000
Mass Comp 0 100
The Choose Signal to Output screen displays a list of the analog output
signal choices. Choices are grouped into three categories: Concentrations,
Other Measurements, and Analog Inputs (if the I/O expansion board
option is installed). This allows the user to select the output signal that will
be assigned to each analog channel. The Concentrations screen is shown
below. See
Table 3–5 for a list of items for each signal group choice.
●
In the Main Menu, choose Instrument Controls > I/O Configuration
> Analog Output Config > select Channel >
Choose Signal to
Output .
CHOOSE SIGNAL TYPE:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG DIAGS ALARM
CHOOSE SIGNAL - CONC
SELECTED OUTPUT: V1
CURRENTLY: PM
SET TO: NONE ?

CHANGE VALUE

SAVE
RANGE AVG DIAGS ALARM
Table 3–5. Signal Type Group Choices
Concentrations Other Measurements Analog Inputs
None None None
PM Barometer Pressure Analog Input 1 (if the I/O expansion
Choose Signal to Output