Thermo Scientific 5030i SHARP, Instruction Manual

Page: 324 / 403

C-Link Protocol Commands
Alarms
B-16 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
These commands report the current beta count alarm minimum and
maximum value settings. The following example reports that the beta count
alarm minimum value is 5000.
Send: alarm beta count min
Receive: alarm beta count min 5000
alarm board temp min
alarm board temp max
These commands report the current board temperature alarm minimum
and maximum value settings. The following example reports that the board
temperature alarm minimum value is 0 °C.
Send: alarm board temp min
Receive: alarm board temp min 0.0 degC
set alarm board temp min value
set alarm board temp max value
These commands set the board temperature alarm minimum and
maximum values to
value , where value is a floating-point number
representing board temperature alarm limits in °C. The following example
sets the board temperature alarm maximum value to 38 °C.
Send: set alarm board temp max 38
Receive: set alarm board temp max 38 ok
alarm conc avg neph min
alarm conc avg neph max
These commands report the current 24-hour average nephelometer
concentration alarm minimum and maximum values setting. The following
example reports that the average nephelometer concentration minimum is
0 μg/m
3 .
Send: alarm conc avg neph min
Receive: alarm conc avg neph min 0.000E+00 μ g/m3
set alarm conc avg neph min value
set alarm conc avg neph max value
These commands set the 24-hour average nephelometer concentration
alarm minimum and maximum values to
value , where value is a floating-
point representation of the concentration alarm limits. Values must be in
the units that are currently set for use. The following example sets the
average nephelometer concentration alarm maximum value to 10000
μg/m
3 .
Send: set alarm conc avg neph max 10000
Receive: set alarm conc avg neph max 10000 ok