Thermo Scientific 5030i SHARP, Instruction Manual

Page: 103 / 403

Operation
Volumetric Conditions
Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual 3-41
OTHER MEASUREMENTS:
>NONE
BARO PRES
VACUUM
FLOW PRES
AMB RH

RANGE AVG DIAGS ALARM
SAMP RH
AMB TEMP
BRD TEMP
FLOW TEMP
FLOW VOL
BETA
BETA RAW
ALPHA RAW
MASS
BETA ZERO
EXT ALARMS
NEPH TEMP
NEPH RH
NEPH IRED
NEPH REF
BETA REF
COMMON FLAGS
DET FLAGS
MASS COMP
The Analog Inputs screen allows the user to assign an analog input signal
(none or analog inputs 1–8) to the selected streaming data item. The
currently selected item is shown by “<--” after it. Once an item is selected,
pressing
will save the selected streaming data item.
●
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > select Item >
Analog Inputs .
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4

RANGE AVG DIAGS ALARM
The TCP/IP Settings menu is used for defining parameters that are
required for Ethernet communications.
Note The instrument power must be cycled after any of these parameters
have been changed for the change to take effect. ▲
Analog Inputs
TCP/IP Settings