Thermo Scientific 5030i SHARP, Instruction Manual

Page: 6 / 403

About This Manual
Safety
ii Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
●
Appendix B “ C-Link Protocol Commands ” provides a description of
the C-Link protocol commands that can be used to remotely control
an analyzer using a host device such as a PC or datalogger.
●
Appendix C “ MODBUS Protocol ” provides a description of the
MODBUS Protocol Interface and is supported both over RS-
232/485 (RTU protocol) as well as TCP/IP over Ethernet.
●
Appendix D “ Gesytec (Bayern-Hessen) Protocol ” provides a
description of the Gesytec (Bayern-Hessen or BH) Protocol Interface
and is supported both over RS-232/485 as well as TCP/IP over
Ethernet.
●
Appendix E “ ESM Protocol Commands ” provides a description of
the ESM Protocol commands (from the prior 5030 platform) that
can be used to remotely control an analyzer using a host device such
as a PC or datalogger.
Review the following safety information carefully before using the analyzer.
This manual provides specific information on how to operate the analyzer,
however, if the analyzer is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert Description
DANGER A hazard is present that could result in death or serious
personal injury if the warning is ignored.
▲
WARNING A hazard or unsafe practice could result in serious
personal injury if the warning is ignored.
▲
CAUTION A hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
▲
Equipment Damage A hazard or unsafe practice could result in property
damage if the warning is ignored.
▲
Safety and Equipment Damage Alerts in this Manual
Alert Description
WARNING The Model 5030 i is supplied with a three-wire grounded
power cord. Under no circumstances should this
grounding system be defeated.
▲
Safety
Safety and Equipment
Damage Alerts