Sony GY-2120WD, Maintenance Manual

Page: 254 / 484

6-30
GY-2120WD/WS
c) SCSI Command Sequence (Logger command No. 3)
Enter “3” as a command number and press the ENTER key.
Up to 384 histories of the SCSI command sent from the host computer are displayed at that time.
LOG=>3
>>>>>>>>>>>>>>>>>>>>>>>>>>>[ SCSI SEQUENCE LOG ]<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
<<<< Log Count : 210 >>>>
No..TIME......COUNT..COMMAND LIST...................STAT...WIDE..SYNC...BOOT
1 0000A90B 1 05 00 00 00 00 00 CC -- ----- 00153
2 0000A90B 1 03 00 00 00 0E 00 GOOD -- ----- 00153
[DATA] 70 00 06 00 00 00 00 52 00 00 00 00 5A 00
3 0000A90B 1 05 00 00 00 00 00 CC -- ----- 00153
4 0000A90B 1 03 00 00 00 0E 00 GOOD -- ----- 00153
[DATA] 70 00 06 00 00 00 00 52 00 00 00 00 28 00
5 0000A90B 1 05 00 00 00 00 00 GOOD -- ----- 00153
[DATA] 00 80 00 00 00 01
6 0000A90B 1 00 00 00 00 00 00 GOOD 8 ----- 00153
7 0000A916 1 00 00 00 00 00 00 GOOD -- SYNC 00153
8 0000A921 1 1B 00 00 00 01 00 GOOD -- ----- 00153
9 0000A921 1 00 00 00 00 00 00 GOOD -- ----- 00153
10 0000A921 1 1A 00 3F 00 80 00 GOOD -- ----- 00153
[DATA] 35 00 10 08 00 01 56 74 00 00 00 00 0F 0E C0 80
< Q:quit/T:top/B:bottom/P:prev/other:next > ?
Description of display
Log Count : Number maintained by log (Max. 384)
No : Number inside the number maintained
1
TIME : Time passed after GY-2120 activation (in hexadecimal and in units of 10 ms)
COUNT : Number of times when the identical command (the end status is also the same)
was repeated
COMMAND LIST : Indicates the CDB of the SCSI command
[LEN] Indicates the length of the data actually sent in the data in/out phase
[DATA] Indicates the top of the data
STAT : Indicates the completion status
GOOD : Normal end
CC : check condition state
RESET : SCSI BUS RESET occurred
WIDE : WIDE negotiations were carried out
SYNC : Sync transfer negotiations were carried out
BOOT : Number of boots increased by one when GY-2120 is started
6-2. Command Description
1
→
2
→