Siemens SINUMERIK 840D sl, Function Manual

Page: 1032 / 2184

Detailed description
2.6 Interface structure
Basic logic functions: PLC Basic program powerline (P3 pl)
48
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Bus addresses
The default bus addresses for the standard configurations are entered in the "Connecting the
MCP on the 810D" figures. In addition to the bus addresses, the implicit communication
service (global data) also requires the definition of a GD circle number.
The following should be taken into account when allocating bus addresses (node no.):
Bus addresses 840D
The two bus segments on the 840D must be examined separately:
Operator panel bus segment:
Bus station
Perm. setting range Standard setting
Operator panel (OP) 1 - 31 1
Machine control
panel/keyboard interface
15 (setting via DIP fix)
COM module 31 13
Programming device/PC
(e.g., for startup)
fixed 0
PLC bus segment:
Bus station
Setting range Default
setting
Comment
PLC 31 2
COM module Fixed depending on PLC
address
3
Programming device/PC
(e.g., for startup)
fixed 0
MCP interface in the PLC
The signals from the machine control panel are routed via the I/O area by default. A
distinction is made between NC and machinespecific signals. NCspecific key signals are
normally distributed by FC 19 to the various mode group, NCK, axis and spindlespecific
interfaces. The reverse applies to the status signals, which are routed to the machine control
panel interface.
Note
FC 19 must be called in the PLC user program.
Customized keys, which can be used to trigger a wide range of machine functions, must be
evaluated directly by the user program. The user program also routes the status signals to
the output area for the LEDs.