Siemens SINUMERIK 840D sl, Function Manual

Page: 612 / 2184

Detailed description
2.6 Block search Type 5 SERUPRO
Basic logic functions: Mode group, channel, program operation, reset response (K1)
54
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Controlling SERUPRO behavior
Machine data:
MD10708 $MN_SERUPRO_MASK
can influence the SERUPRO behavior as follows:
Stop at M0 during search phase.
Bit 0 = 0
NC is stopped at M0 during the search phase.
Bit 0 = 1 NC is not stopped at M0 during the search phase.
Allow part program command "START" if alarm 16942 is issued.
Bit 1 = 0
The alarm aborts the search phase during part program START.
Bit 1 = 1 The alarm is suppressed. In channel i, a program uses the part program
command "Start(j)" per the following sequence:
In channel j, the preselected program is started.
Channel j begins to actually start with moving axes.
In channel j, program test can be preselected by the user
. Channel j will now not select a search target.
Bit 2 Reserved
SERUPRO not ended simultaneously.
Bit 3 = 0
Switches the function off. All channels that find the search target (also for
self-acting SERUPRO) end SERUPRO at the same time.
Bit 3 = 1 SERUPRO ends as soon as the simulation has found the search target.
No further synchronization operations take place in the channels started
by SERUPRO.