Detailed description
2.12 Block descriptions
Basic logic functions: PLC Basic program powerline (P3 pl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
145
PI service: TRESMO
Function Reset monitoring values:
This PI service resets the monitoring values of the designated edges of the designated tools
to their setpoint (initial) values.
This only relates to tools with active monitoring.
Compare this with the
RESETMON
NC command.
Parameterization
Signal
Type
Value range
Description
PIService
ANY
PI. TRESMO Reset monitoring values
Unit
INT
1 to 10
TO area
WVar1
WORD
-max ..max
ToolNumber
0: Applies to all tools
>0: Applies only to this tool
<0: Applies to all sister tools of the specified T No.
WVar2
WORD
0 ... max.
D number
>0: Monitoring of specified edge of specified tools is reset.
0: Monitoring of all edges of specified tools is reset.
WVar3
WORD
0 ...15
Monitoring types
Type of monitoring to be reset.
This parameter is binary-coded.
1: Tool-life monitoring is reset.
2: Count monitoring is reset.
4: Wear monitoring is reset.
8: Sum offset monitoring is reset.
Combinations of monitoring types can be reset by adding
the values above.
0: All active tool-monitoring functions ($TC_TP9) are reset.
Summary of Contents for SINUMERIK 840D sl
