Siemens SINUMERIK 840D sl, Function Manual

Page: 2170 / 2184

Glossary
Basic logic functions: Appendix
24
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
words with respect to block format. Identifiers must be unique. It is not permissible to use the
same identifier for different objects.
Inch measuring system
Measuring system, which defines distances in inches and fractions of inches.
Inclined surface machining
Drilling and milling operations on workpiece surfaces that do not lie in the coordinate planes
of the machine can be performed easily using the function "inclined-surface machining".
Increment
Travel path length specification based on number of increments. The number of increments
can be stored as → setting data or be selected by means of a suitably labeled key (i.e., 10,
100, 1000, 10000).
Incremental dimension
Also incremental dimension: A destination for axis traversal is defined by a distance to be
covered and a direction referenced to a point already reached. See → Absolute dimension.
Intermediate blocks
Motions with selected → tool offset (
G41
/
G42
) may be interrupted by a limited number of
intermediate blocks (blocks without axis motions in the offset plane), whereby the tool offset
can still be correctly compensated for. The permissible number of intermediate blocks which
the control reads ahead can be set in system parameters.
Interpolator
Logic unit of the → NCK that defines intermediate values for the motions to be carried out in
individual axes based on information on the end positions specified in the part program.
Interpolatory compensation
Interpolatory compensation is a tool that enables manufacturing-related leadscrew error and
measuring system error compensations.
Interrupt routine
Interrupt routines are special → subroutines that can be started by events (external signals)
in the machining process. A parts program block which is currently being worked through is
interrupted and the position of the axes at the point of interruption is automatically saved.