Raritan PX2-1000 SERIES, User Manual

Page: 526 / 648

Appendix C: Configuration or Firmware Upgrade with a USB Drive
507

If this option is set to
true
, the firmware upgrade is always
performed even though your PX is running the same firmware
version as the specified firmware file.

This option CANNOT break other constraints like the minimum
downgrade version.
config

Supported as of release 2.4.0.

Specify the name of the configuration file containing device settings.

The suggested filename is
config.txt
. See
config.txt
(on page 509).
device_list

Specify the name of the configuration file listing all PX devices to
configure and their device-specific settings.

This file is required if any macros are used in the device
configuration file "config.txt."

The suggested filename is
devices.csv
. See
devices.csv
(on page
511).
match

Specify a match condition for identifying a line or a PX device in the
device configuration file "devices.csv."
The option's value comprises one word and one number as
explained below:
 The word prior to the colon is an identification property, which is
either
serial
for serial number or
mac
for MAC address.
 The number following the colon indicates a column in the
devices.csv
file.
For example,
mac:7
instructs the PX to search for the MAC address
in the 7th column of the "devices.csv" file.

The default value is
serial:1
, making the PX search for its serial
number in the first column.

This option is used only if the "device_list" option has been set.
collect_diag

If this option is set to
true
, the diagnostic data of the PX is
downloaded to the USB drive.

The filename of the diagnostic data written into the USB drive varies,
depending on the PX firmware version:
 Filename prior to version 3.0.0:
diag_<unit-serial>.zip
, where
<unit-serial> is the serial number of the PX.
 Filename as of version 3.0.0:
diag_<unit-serial>.tgz