Raritan PX2-1000 SERIES, User Manual

Page: 431 / 648

Chapter 8: Using the Command Line Interface
412
config:# security ipAccessControl ipv4 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>

IPv6 commands
Modify an IPv6 rule's IP address and/or prefix length:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask>
Modify an IPv6 rule's policy:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> policy
<policy>
Modify all contents of an IPv6 existing rule:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
Variables:

<direction> is one of the options:
in
or
out
.
Direction Description
in Inbound traffic.
out Outbound traffic.

<rule_number> is the number of the existing rule that you want to
modify.

<ip_mask> is the combination of the IP address and subnet mask
values (or prefix length), which are separated with a slash. For
example, an IPv4 combination looks like this:
192.168.94.222/24
.

<policy> is one of the options:
accept, drop
or
reject
.
Option Description
accept Accepts traffic from/to the specified IP
address(es).
drop Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.