Raritan PX2-1000 SERIES, User Manual

Page: 434 / 648

Chapter 8: Using the Command Line Interface
415
If the content is successfully entered, the CLI displays this message
"Successfully entered Restricted Service Agreement" followed by the
total number of entered characters in parentheses.
Note: The new content of Restricted Service Agreement is saved only
after typing the
apply
command. See Quitting Configuration Mode
(on page 372).
Example
The following example illustrates how to specify the content of the
Restricted Service Agreement.
1. Type the following command and press Enter to start entering the
content.
config:# security restrictedServiceAgreement bannerContent
2. Type the following content when the CLI prompts you to enter the
content.
IMPORTANT!! You are accessing a PDU. If you are not the
system administrator, do NOT power off or power cycle
any outlet without the permission of the system
administrator.
3. Press Enter.
4. Type the following:
--END--
5. Press Enter again.
6. Verify that the message "Successfully entered Restricted Service
Agreement" is displayed, indicating that the content input is
successful.
Login Limitation
The login limitation feature controls login-related limitations, such as
password aging, simultaneous logins using the same user name, and the
idle time permitted before forcing a user to log out.
A login limitation command begins with
security loginLimits
.
You can combine multiple commands to modify various login limitation
parameters at a time. See
Multi-Command Syntax
(on page 482).