Raritan PX2-1000 SERIES, User Manual

Page: 202 / 648

Chapter 6: Using the Web Interface
183
 None
7. Port (None/StartTLS) - The default Port is 389. Either use the
standard LDAP TCP port or specify another port.
8. Port (TLS) - The default is 636. Either use the default port or specify
another port. This field is enabled only when "TLS" is selected in the
Security field.
9. Enable verification of LDAP Server Certificate - Select this checkbox
if you would like the PX to verify the validity of the selected LDAP
server certificate. For example, the PX will check the certificate's
validity period against the system time.
10. CA Certificate - Consult your AA server administrator to get the CA
certificate file for the LDAPS server. Click Browse to select the TLS
CA certificate file.
 Click Show to view the installed certificate's contents.
 Click Remove to delete the installed certificate if it is
inappropriate.
11. Allow expired and not yet valid certificates - If a certificate has been
installed, use this checkbox to determine whether the validity period
of the certificate affects the authentication.

To always make the authentication succeed regardless of the
validity period, select this checkbox.
 To make the authentication fail when any TLS certificate in the
selected certificate chain is outdated or not valid yet, deselect
the checkbox.
12. Anonymous Bind - For "OpenLDAP," use this checkbox to enable or
disable anonymous bind.
 To use anonymous bind, select this checkbox.
 When a Bind DN and password are required to bind to the
external LDAP/LDAPS server, deselect this checkbox.
13. Use Bind Credentials - For "Microsoft Active Directory," use this
checkbox to enable or disable anonymous bind.

To use anonymous bind, deselect this checkbox. By default it is
deselected.
 When a Bind DN and password are required to bind to the
external LDAP/LDAPS server, select this checkbox.
14. Bind DN - Specify the DN of the user who is permitted to search the
LDAP directory in the defined search base. This information is
required only when the Use Bind Credentials checkbox is selected.
15. Bind Password and Confirm Bind Password - Enter the Bind
password in the Bind Password field first and then the Confirm Bind
Password field. This information is required only when the Use Bind
Credentials checkbox is selected.