Raritan PX2-1000 SERIES, User Manual

Page: 235 / 648

Chapter 6: Using the Web Interface
216
Action Function
Switch outlets Switches on, off or cycles the power to the
specified outlet(s). See
Switch Outlets
(on
page 232).
Switch peripheral
actuator Switches on or off the mechanism or system
connected to the specified actuator. See
Switch Peripheral Actuator
(on page 233).
Note: The "Change load shedding state" and "Switch outlets" options
are only available for outlet-switching capable models.
6. Click OK to save the new action.
Note: If you do not click OK before quitting the current settings page,
a message appears. Then click Yes to save the changes, Discard to
abort or Cancel to return to the current settings page.
7. To create additional actions, repeat the above steps.
8. Click Close to quit the dialog.
Action Group
You can create an action group that performs up to 32 actions. After
creating such an action group, you can easily assign this set of actions to
an event rule rather than selecting all needed actions one by one per
rule.
To create an action group:
1. Choose Device Settings > Event Rules. The Event Rule Settings
dialog appears.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Execute an action group.
6. To mark an action as part of the action group, select it from the
Available Actions list box, and click to move it to the Used
Actions list box. To make multiple selections, press Ctrl+click or
Shift+click to highlight multiple ones.
To move all actions to the Used Actions list box, click . A
maximum of 32 actions can be grouped.