Raritan PX2-1000 SERIES, User Manual

Page: 406 / 648

Chapter 8: Using the Command Line Interface
387
Setting the IPv4 Configuration Mode
This command determines the IP configuration mode.
config:# network ipv4 ipConfigurationMode <mode>
Variables:

<mode> is one of the modes:
dhcp
or
static
.
Mode Description
dhcp The IPv4 configuration mode is set to DHCP.
static The IPv4 configuration mode is set to static IP
address.
Setting the IPv4 Preferred Host Name
After selecting DHCP as the IPv4 configuration mode, you can specify
the preferred host name, which is optional. The following is the
command:
config:# network ipv4 preferredHostName <name>
Variables:

<name> is a host name which:
 Consists of alphanumeric characters and/or hyphens
 Cannot begin or end with a hyphen
 Cannot contain more than 63 characters
 Cannot contain punctuation marks, spaces, and other symbols
Setting the IPv4 Address
After selecting the static IP configuration mode, you can use this
command to assign a permanent IP address to the PX device.
config:# network ipv4 ipAddress <ip address>
Variables:

<ip address> is the IP address being assigned to your PX device.
The value ranges from 0.0.0.0 to 255.255.255.255.