Raritan PX2-1000 SERIES, User Manual

Page: 102 / 648

Chapter 5: Using the PDU
83
Resetting the Button-Type Circuit Breaker
Your button-type circuit breakers may look slightly different from the
images shown in this section, but the reset procedure remains the same.
To reset the button-type breakers:
1. Locate the breaker whose ON button is up, indicating that the
breaker has tripped.
2. Examine your PX and the connected equipment to remove or resolve
the cause that results in the overload or short circuit.
This step is
required, or you cannot proceed with the next step.
3. Press the ON button until it is completely down.
Resetting the Handle-Type Circuit Breaker
Your handle-type circuit breakers may look slightly different from the
images shown in this section, but the reset procedure remains the same.
To reset the handle-type breakers:
1. Lift the hinged cover over the breaker.
2. Check if the colorful rectangle or triangle below the operating handle
is GREEN, indicating that the breaker has tripped.