Raritan PX2-1000 SERIES, User Manual

Page: 362 / 648

Chapter 8: Using the Command Line Interface
343
Networking Mode
This command shows whether the current networking mode is wired or
wireless.
# show network mode
Note: If the PX is a slave device connected to the LAN via the master PX
device, the
show network mode
command displays
wired(USB)
instead
of
wired
.
Wireless Configuration
This command only shows the wireless configuration of the PX device,
such as the SSID parameter.
# show network wireless
To show detailed information, add the parameter "details" to the end of
the command.
# show network wireless details
Network Service Settings
This command shows the network service settings only, including the
Telnet setting, TCP ports for HTTP, HTTPS, SSH and Modbus/TCP
services, and SNMP settings.
# show network services <option>
Variables:

<option> is one of the options:
all
,
http
,
https
,
telnet
,
ssh
,
snmp
,
modbus
and
zeroconfig
.
Option Description
all Displays the settings of all network services,
including HTTP, HTTPS, Telnet, SSH and SNMP.
Tip: You can also type the command without
adding this option "all" to get the same data.
http Only displays the TCP port for the HTTP service.