Raritan PX2-1000 SERIES, User Manual

Page: 425 / 648

Chapter 8: Using the Command Line Interface
406
Customizing the Date and Time
If intending to manually configure the date and time, use the following
CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to
customizing the date and time. See
Determining the Time Setup
Method (on page 403).
Assign the date:
config:# time set date <yyyy-mm-dd>
Assign the time:
config:# time set time <hh:mm:ss>
Variables:
Variable Description
<yyyy-mm-dd> Type the date in the format of yyyy-mm-dd.
For example, type
2015-11-30
for November 30,
2015.
<hh:mm:ss> Type the time in the format of hh:mm:ss in the
24-hour format.
For example, type
13:50:20
for 1:50:20 pm.
Setting the Automatic Daylight Savings Time
This command determines whether the daylight savings time is applied
to the time settings.
config:# time autoDST <option>
Variables:

<option> is one of the options:
enable
or
disable
.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.