Raritan PX2-1000 SERIES, User Manual

Page: 98 / 648

Chapter 5: Using the PDU
79
LEDs for Measurement Units
Five small LED indicators are on the LED display: four measurement
units LEDs and one Sensor LED.
The measurement units vary according to the readings that appear in the
three-digit row. They are:

Amp (A) for current

Volt (V) for voltage

Kilowatt (kW) for active power

Percentage (%) of the unbalanced load
One of the measurement unit LEDs will be lit to indicate the unit for the
value currently shown in the three-digit row.
The Sensor LED is lit only when PX detects the physical connection of
any environmental sensor.
The five LEDs look similar to this diagram but may slightly vary according
to the model you purchased.
Two-Digit Row
The two-digit row shows the number of the currently selected outlet, line
or circuit breaker. Values that may appear include:

Two-digit numbers: This indicates the selected outlet. For example,
03 indicates outlet 3.

C
x
: This indicates the selected circuit breaker, where
x
is the circuit
breaker number. For example, C1 represents Circuit Breaker 1.

L
x
: This indicates the selected line, where
x
is the line number. For
example, L2 represents Line 2.
Note: For a single-phase model, L1 current represents the Unit
Current.