Chapter 5: Using the PDU
86
4. Take the fuse out of the holder.
5. Insert a new fuse into the holder. There is no orientation limit for fuse
insertion.
6. Close the fuse holder and the hinged cover in a reverse order.
Fuse Replacement on 1U Models
On the 1U model, a fuse is installed in a fuse knob, which fits into the
PDU's fuse carrier.
Number
Description
Fuse carrier
Fuse knob where a fuse is installed
To replace a fuse on the 1U PDUs:
1. Disconnect the PDU's power cord from the power source.
2. Remove the desired fuse from the PDU's fuse carrier using a flat
screwdriver.
a. Rotate the fuse knob counterclockwise until its slot is inclined to
45 degrees.
b. Take this knob out of the fuse carrier.
Summary of Contents for PX2-1000 SERIES
