Raritan PX2-1000 SERIES, User Manual

Page: 527 / 648

Appendix C: Configuration or Firmware Upgrade with a USB Drive
508

The PX utters a short beep when writing the diagnostic data to the
USB drive.
factory_reset

Supported as of release 3.0.0.

If this option is set to
true
, the PX will be reset to factory defaults.

If the device configuration will be updated at the same time, the
factory reset will be executed before updating the device
configuration.
bulk_config_restore

Supported as of release 3.1.0.

Specify the name of the bulk configuration file used to configure or
restore the PX.
Note: See Saving the PX Configuration (on page 295) for
instructions on generating a bulk configuration file.

Additional configuration keys set via the
config.txt
file will be applied
after performing the bulk restore operation.

This option CANNOT be used with the option "full_config_restore."

If a firmware upgrade will be performed at the same time, you must
generate the bulk configuration file based on the NEW firmware
version instead of the current firmware version.
full_config_restore

Supported as of release 3.1.0.

Specify the name of the full configuration backup file used to restore
the PX.
Note: See Backup and Restore of PX Device Settings (on page
297) for instructions on generating the full configuration backup file.

Additional configuration keys set via the
config.txt
file will be applied
after performing the configuration restore operation.

This option CANNOT be used with the option "bulk_config_restore."

If a firmware upgrade will be performed at the same time, you must
generate the full configuration backup file based on the NEW
firmware version instead of the current firmware version.