Raritan PX2-1000 SERIES, User Manual

Page: 445 / 648

Chapter 8: Using the Command Line Interface
426
Enabling or Disabling Front Panel Outlet Switching
This section applies to outlet-switching capable models only.
The following CLI commands control whether you can turn on or off an
outlet by operating the front panel display.
To enable the front panel outlet control feature:
config:# security frontPanelPermissions add switchOutlet
To disable the front panel outlet control feature:
config:# security frontPanelPermissions remove switchOutlet
Examples
This section illustrates several security configuration examples.
Example 1 - IPv4 Firewall Control Configuration
The following command sets up two parameters of the IPv4 access
control feature.
config:# security ipAccessControl ipv4 enabled true defaultPolicyIn accept
defaultPolicyOut accept
Results:

The IPv4 access control feature is enabled.

The default policy for inbound traffic is set to "accept."

The default policy for outbound traffic is set to "accept."
Example 2 - Adding an IPv4 Firewall Rule
The following command adds a new IPv4 access control rule and
specifies its location in the list.