Novexx Solutions 64-04, User Manual

Page: 236 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
119
Delimiter Char
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Used as a parameter place marker in MLI format instructions.
xxH Default: xx = 2C (0x2C = „Comma“)
Label Top
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Label top offset (y-offet) in dots. Equals the parameter
PRINT PARAMETERS >
Y-Printadjust
, which will be ignored, when MLI printjobs are printed.
xxx Dots
Setting range: -240 - +240; Default: 0; Step width: 1
Left Position
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Left position offset (x-offset) in dots. Equals the parameter
PRINT PARAMETERS >
X-Printadjust
, which will be ignored, when MLI printjobs are printed.
xxx Dots Setting range: -9999 - +9999; Default: 0; Step width: 1
Manual Calibrate
64-xx ALX 92x DPM PEM ALX 73x (PMA)
For endless material, the label length information is sent in the printjob. For
punched material, the label length has to be detected by activating this func-
tion.
YES Label length calculation for punched material.

Activate this function, if label material has changed.

Calibration should be done after changing material, when there are no
printjobs loaded in the printer.

Shortcut (in offline mode): press the feed + prog buttons simultaneously
to activate the calibration.
Resolution
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Print resolution in dpi. A 200 dpi graphic printjob can be printed with a 300 dpi
printhead.
xxx DPI Setting range: 200/300 dpi; Default: 300 dpi;