06/15 Rev. 03
USER MANUAL
Basic Operating Procedures
64-xx
18
Memory card and
Easy-Plug file
Printing starts immediately after switching on
1. Name the print job file in the root directory on the memory card
autostrt.for
.
2. Insert the memory card into the card slot on the printer (see next section).
3. Switch on the rprinter.
The printer processes the print job as soon as it is in online mode.
Alternatively, the print job can be started in standalone mode; for more details, see
topic section “Advanced Applications”,
Standalone Operation
on page 8.
Applying memory cards
The printer of the 64-xx series support the following memory card types:
• CompactFlash (CF) Typ I [13]
• SD [14]
1
• SDHC
Flawless functioning of the memory cards is only guaranteed for the types distributed
by Avery Dennison:
[13] CF card (article no. A7681).
[14] SD card (article no. A101465).
Applying CF/SD cards
: see Plugin-card manual, topic section „Application“, chapter
„CF/SD cards“.
1) SD and SDHC cards are supported with firmware version 6.35 or above.
CAUTION! - Observe the following guidelines to avoid damaging the printer or the CF
card.
Only use CF -cards approved by the manufacturer.
Always wait at least 5seconds after switching off the printer before removing or
inserting the CF card.
When inserting or removing the CF card, never use force.
Slim guide notch
Wide guide notch
Contacts
