06/15 Rev. 03
USER MANUAL
Basic Operating Procedures
64-xx
13
Switching on the printer
Turn on the printer using the power switch (set to position “1”). The following se-
quence of messages is displayed:
If the parameter
SYSTEM PARAMETER > Turn-on mode
is set to “Offline”, the printer switch-
es directly to offline mode when turned on.
CAUTION! - Wait at least 10 seconds between switching the device off and on
again, otherwise any modified parameter settings are not saved.
Configuring the data interface
By factory default, the 64-xx is set for data transfer via the USB interface. Print data
can also be transferred via the RS232, RS422/485
1
, USB, Centronics
2
or Ethernet in-
terface.
Choosing the port:
INTERFACE PARA >EASYPLUGINTERPR > Interface
Configuring the port:
• RS232:
INTERFACE PARA >COM1 PORT > ...
• RS232/422/485 (optional):
INTERFACE PARA >COM3 PORT > ...
• Ethernet:
INTERFACE PARA >NETWORK PARAM. > ...
We recommend that your network administrator configures the network settings.
USB: no configuration required
Setting parameters
: see topic section
Info-Printouts and Parameters
, chapter “Using
the Parameter Menu”.
Ethernet interface
: Information about using it can be found in topic section
Advanced
Applications
.
System start...
The boot loader is starting.
System start...
Start user prog
Valid firmware recognised, program is starting.
64-05
V 6.52
Printer type
Version number of the printer firmware
Memory: 64 MB
Flashcard: 32 MB
Internal RAM (here: 64 MB)
Optional RAM on the memory medium (here: 32 MB) –
only displayed if a memory medium (memory card or USB
stick) is connected.
OFFLINE 0 JOBS
Initialisation
Offline mode
ONLINE 0 JOBS Online mode. The unit is ready for printing.
1) Only with installed I/O interface board (option)
2) Only with installed Centronics interface board (option)