manualshive.com logo in svg

Novexx Solutions 64-04, User Manual, Page: 239 / 438

Share
Download
Novexx Solutions 64-04 User Manual Download Page 239

06/15 Rev. 6.00-02

USER- / SERVICE MANUAL

Info-Printouts & Parameters

64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)

122

Command  ^JM

64-xx

ALX 92x

DPM

PEM

ALX 73x (PMA)

Interpreter version: 1.32 or higher

The ^JM command changes the printer resolution:

•

^JMA sets the resolution to the default value = printhead resolution.

•

^JMB sets the resolution to 200 dpi, if the actual resolution is 300 dpi. If the 
actual resolution is 200 dpi, this command is ignored.

Disable

The resolution setting sent in the MLI printjob is ignored.

Enable

The resolution setting is not ignored.

Command ^MD/

~

SD

64-xx

ALX 92x

DPM

PEM

ALX 73x (PMA)

The MLI commands ^MD and 

~

SD (set printhead darkness value) are pro-

cessed optionally.

Enable

^MD- and 

~

SD are processed.

Disable

^MD- and 

~

SD are ignored.

Summary of Contents for 64-04























































































































































































































































































































































































































































Reviews:

No comments