06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
89
Signal / buzzer
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
On
Tone signal activated
Off
Tone signal deactivated
Access authoriz.
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Access authorization
Limits the access either to all printer functions (Power-up code) or only to the
parameter menu (user or supervisor mode). Changed settings become active
after the next switch-on.
Key codes
Regardless when the code is prompted, can three different key codes be
typed in tab. 8.
Entering a key code: Type the corresponding buttons of the control panel in
succession. A valid key code switches the printer into the appropriate mode.
Especially service technicians may use the direct access into production
mode, even if the parameter
Access authoriz.
is set to „Off“, what means that no
password will be queried at all. To do so, proceed as follows:
1. Switch printer off.
2. Switch printer on, simultaneously press the Feed+Prog-key until the printer
type is displayed.
Enter code
Mode
Key code
Impact
User
2x Cut
a
, Feed, Online
a) With DPM, PEM, ALX 92x press Apply-key instead.
Access only to the submenus
PRINT INFO
and
SERVICE DATA
Operator
Cut, Online, Feed, Prog
Access to reduced parameter
menu
Supervisor
2x Online, Feed, Cut, 2x Online
Access to all parameters
except production parameters
Production
Cut, Online, Feed, Cut, 3x Online
Access to all parameters
[8]
Permissible key codes.
CAUTION!
Production mode: Input errors to certain parameters can make the printer in-
operable or can damage it.
The production code may only be applied by
trained service technicians
.