06/15 Rev. 03
USER MANUAL
Basic Operating Procedures
64-xx
12
Basic Operating Procedures
Connecting the printer
1. Ensure that the printer is switched off (mains switch [11C] at “0” position).
2. Connect the mains cable [11B] that came with the printer to the mains connector
at the printer.
3. Connect the mains cable into a mains socket.
4. Using a suitable data cable [11A], connect the printer to a data host
1
.
[11] Sockets for data cable (here: Centronics) (A) and power cable (B).
Cables
: Ordering numbers for suitable power or data cables can be found in top-
ic section „Accessories“.
WARNING!
The printer operates using mains voltage! Touching electrically live parts can cause
exposure to hazardous electrical currents and may lead to burns.
Make sure that the printer is switched off before connecting the power cable.
Only operate the printer using the system voltage indicated on the nameplate.
Only connect the printer to a grounded power socket fitted to authorised stan-
dards.
The power cable should be run to the printer so that
• nobody will trip on it, and that
• the power plug can easily be pulled out if necessary.
1) e. g. computer or network
A
B
C