06/15 Rev. 6.01-01
USER MANUAL
Einrichten
64-xx – 64-xx dispenser
15
Adjusting the position of the
print head
Only for the standard version of 64-05/
06/08!
The print head 0 line can be adjusted va-
riably from 2 mm (from the left edge of the
label) to 13 mm:
1. Loosen both thumb screws (1) and push
the print head to the desired position.
The print head does not have to be
taken off!
2. Tighten the screws again.
3. Loosen the stud screws at the black plastic
disks (2) using a 2 mm allen key (one
screw per disk).
4. Adjust the plastic disks to the same posi-
tion as the inside of the print head.
5. Tighten the stud screws again.
1
2
