Novexx Solutions 64-04, User Manual, Page: 243 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
126

„Custom defaults“ only appears, if custom settings have already been
stored.
Factory defaults The parameters are set to factory defaults.
Custom defaults
64-xx ALX 92x DPM PEM ALX 73x (PMA)

Parameter appears only in production mode.
Apply current
Stores the current parameter settings as values for the default setup. Those
settings are restored by calling parameter
SPECIAL FUNCTION >
Factory settings =
„Custom defaults“.
Delete Deletes the stored custom default settings. „Delete“ is only visible, if settings
have already been stored.
Store Parameters
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Parameter settings are saved in a text file on memory card (directory
FORMATS\). Considered are also parameters which belong to options,
which are not activated.
Without adj. par
(Default) Parameters, which contain device specific settings, are not saved.
(Default file name: SETUP.FOR).
Application example : Transfer of printer settings to another printer (device
specific settings as printhead resistance or sensor settings should not be
overwritten).
With adjust para Parameters, which contain device specific settings, are also saved. The rel-
evant parameter names are marked with a * in the text file.
(Default file name: SETUPALL.FOR).
Application example : Service

For more information about saving and reading parameter settings read topic
section „Advanced Applications“, chapter „Saving and Transferring
parameter settings“.
Store Diagnosis
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Stores the diagnostic data on memory card. The default file name composes
as follows:
„Diagnose AP 5.4 203 Dpi A429403110613.log“
•
AP 5.4 203 Dpi : printer type and printhead resolution
•
A429403110613 : serial number of the CPU board; equals the value
displayed under
SERVICE DATA > CPU board data > Serial number