06/15 Rev. 10
USER + SERVICE MANUAL
/Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
38
5001
No gap found
Status
No gap found or several blank labels fed.
Measure
Acknowledge by pressing the Online button.
Check the print mask for gap definition (material length).
Check whether the correct material has been inserted.
Check that the photoelectric switch is clean.
Check material feed and position of photoelectric switch.
Check sensitivity of the photoelectric switch (Parameter
SYSTEM PARAMETERS > Sens. punch-LS
). Materials providing a pour contrast
between label and backing paper or between reflex mark and label require
a higher sensitivity setting.
After confirmation using the Online button, the material is fed forward
automatically and the next gap is sought.
5002 Material
end
Status
Material end. Material no longer in the gap LS.
Measure
1. Press Online button in order to acknowledge the status report.
Display:
OFFLINE x JOBS
2. Insert material and check the position of the photoelectric switch, correct if
necessary.
3. Press Online button: processing of the job continues, gap is reinitialised.
5003 Cover
open
Status
64-xx / DPM / PEM / ALX 92x:
Cover open
Housing cover is open. Opening the cover causes all other eventually
waiting status messages (e.g. ribbon end) to be deleted and the "Cover
open" message immediately to be displayed. Closing the cover
automatically acknowledges the message.
AP 4.4 / 5.4:
Printhead pressure lever open
The printhead pressure lever was opened, during:
•
the feeding of material or
•
printing.
The error message is automatically acknowledged with the closing of the
printhead pressure lever.
Measure
Close the cover or printhead lever respectively.
