06/15 Rev. 6.01-01
USER MANUAL
Einrichten
64-xx – 64-xx dispenser
10
Inserting ribbon
1. Switch the printer on.
2. Open the hood of the printer.
3. Place the roll of ribbon on the right ribbon
mandrel (1) so that it can unwind anti-
clockwise.
4. Place the empty ribbon core on the left
mandrel (2).
5. Lead the end of the protective ribbon (yel-
low here) under the ribbon deflector (3)
and print head (4).
6. Then pull the (protective) ribbon upwards
and lay it over the ribbon roller (5).
7. Lead the (protective) ribbon under the
rewinder mandrel (2) and secure it on the
empty ribbon core using the self-adhesive
strip (6) (Fig. 3).
In many types of ribbon, the
protective ribbon (shown in
yellow in the illustration) is
followed by a strip of cleaning
ribbon (7) which serves to remove
contamination from the print head. It is
essential that the material is inserted as
described so that the cleaning effect is
guaranteed!
8. Check that the ribbon is free of folds and is
running true. Tension the ribbon by hand if
necessary.
1
2
3
4
