06/15 Rev. 6.01-01
USER MANUAL
Einrichten
64-xx – 64-xx dispenser
16
Material parameters
The following three parameters are used to tell the printer the properties
of the label material with which you would like to work:
Advice on setting parameters can be found under “Operating the para-
meter menu” in the topic section “Info printouts and parameters”.
Parameter
Function
PRINT PARAMETER > material type
Sets the type of material (punched or
continuous)
PRINT PARAMETER > material length
Sets the length of material
PRINT PARAMETER > material width
Sets the width of the material
SYSTEM PARAMETER > light sens. type
Sets the type of light barrier (reflector
or transmitted light) suitable for the
material (marks or punches)
[Tab. 1]
Important parameters for setting material properties