06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
80
Error reprint
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
If an error occurs while a label is printed, the last printed label is reprinted.
For label layouts containing variable data (for example, count fields), disable
the reprint function.
On
Reprint in error cases (default setting)
Off
No reprint in error cases.
EasyPlug error
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Handling of errors caused by faulty Easy-Plug commands.
Tolerant handl.
The label is printed, after the Easy-Plug/Bitimage error was acknowledged
(default setting).
Strict handling
The Easy-Plug command, which caused the error, is displayed after approx.
2 seconds in the lower display line. The displayed text is up to 30 characters
long and is scrolled automatically.
If a single character caused the error, this character is marked with „>> <<„
in the display text, to facilitate the detection.
By pressing the cut button, the display can be toggled between error mes-
sage and Easy-Plug command text.
After acknowledging the first occured Easy-Plug error, the printjob and the
spooler are deleted (as by #!CA). This prevents the printing of labels with for-
mat errors.
Single job mode
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
In single job mode (also stop mode) the printer stops after every job and waits
until the operator restarts the print process.
Off
Single job mode is switched off (default setting).
On
Single job mode is switched on. The printer always displays "Start next job",
before starting a new print job. This requests the user to acknowledge by
pressing the Online button.
Head resistance
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
For optimum print quality, the individual print head resistance of the thermo
head employed in the device must be set once with this parameter.
When replacing the print head, the resistance value of the print head (to be
read off from the print head) must be entered again.
