Novexx Solutions 64-04, User Manual

Page: 333 / 438

06/15 Rev. 10 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
67
8305 Bar code print
Status Error during calculation of the bar code print image.
Measure

Acknowledge by pressing the Online button.
Measure

Check whether the transmitted data is permitted for the bar code type; if
necessary alter the data.
8306 Plain-copy len.
Status Illegal: bar code plain-copy line has more than 300 characters.
Measure  Reduce line length.
8307 Readline dist.
Status General software error.
Measure  Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
8308 Bar code ratio
Status Illegal bar code ratio.
Measure  Select another ratio.
8309 Module range
Status Maximum range of the bar code module exceeded.
Measure  Reduce module range.
8310 Bar code element
Status Bar code element exceeds the maximum permitted size of 253 dots
(21 mm).
Measure  Reduce size of the bar code element.
8311 Barcode table
Status General software error.
Measure

Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
8400 PDF417 ECC
Status Bar code PDF417: incorrect ECC level (Error Correction Level).
Measure

Alter ECC level.
8401 PDF417 Lines
Status Bar code PDF417: illegal number of lines.
Measure

Alter number of lines.