manualshive.com logo in svg

Novexx Solutions 64-04, User Manual

Share
Download
Novexx Solutions 64-04 User Manual Download Page 349

09/12 Rev. 5.08-01

USER MANUAL

Internal Fonts

All printers

3

Parameter settings

• The font parameter must be set to „IBM“ (=default setting) (Tab. 2).
• The optional character filter suppresses characters < 20 hex. If you want to print 

those characters, switch the character filter off (Tab. 2).

Refer to topic section „Info-printouts and parameters“ for detailed information on 
parameters.

Fixfonts and Speedo fonts

Use the Easy Plug command „YT“ for fixfonts and „YN“ for Speedo fonts to print text 
with internal fonts.

For more information on Easy Plug commands refer to the Easy Plug Manual, topic 
section 

Description of commands 

.

Customized Fonts

Prerequisites

Only with 64-xx Gen. 3

Starting with firmware version 5.02, customized fonts can be loaded separately into 
the flash memory.

Prerequisites:

• At least 4 MB flash memory are available.
• Free flash memory of the required amount.

Loading fonts

Files with customized fonts can be ordered at Avery Dennison. Such font files carry 
the extension *.s3b (as firmware files) and have to be loaded in the same way as 
firmware files.

Firmware version before 3.00 (32Bit) or 4.00 (64Bit) respectively provided the in-

ternal fonts in separate *.s3b files. Those files can 

not

 be used with firmware versions 

5.02 and above!
Refer to the service manual, topic section 

Firmware 

.

Printer

Parameter

Setting

TTX x50

TTX 67x

TDI

SYSP > NACH

IBM

IFAC > <20H

No

64-xx

DPM

PEM

ALX 92x

ALX 73x 
(printer)

AP 4.4

AP 5.4

AP 7.t

SYSTEM PARAMETERS > Character sets

IBM

SYSTEM PARAMETERS > Character filter

All character

[Tab. 2] Necessary parameter-settings to get all listed characters printed.

Summary of Contents for 64-04























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands