06/15 Rev. 10
USER + SERVICE MANUAL
/Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
66
8201
Font downl. full
Status
The font download buffer is full.
Measure
Allocate more memory for the download buffer using the parameter
SYSTEM PARAMETERS > Font downl. area
.
Rename some speedo-fonts on the CompactFlash-Card, you actually don´t
use. All speedo-fonts named fontxxx.spd (xxx = font no.) are being loaded
into the font download buffer while system startup.
For Details refer to the manual „Cards“, subject section „Using cards“,
paragraph „memory card“.
8202 Font
deleted
Status
Attempt to access a font, which is no longer available on memory card or
on RAM disk (font was deleted or renamed).
Measure
Check the label layout. Load the not available font or use another,
available, font.
8300
Bar code corr.
Status
Error: a bar code correction factor greater than +/- 25% has been selected.
Measure
Reduce correction factor.
8301
Bar code data
Status
Incorrect bar code data. The bar code data is not permitted for the selected
bar code type.
Measure
Use data permitted for the bar code type.
8302 Barcode
checksum
Status
Error during calculation of the bar code check sum.
Measure
Check transmitted data.
If the error continues to occur please contact the manufacturer. Send the
transmitted Easy Plug data.
8303
Bar code sample
Status
Error during calculation of the bar code sample.
Measure
Check whether the transmitted data is permitted for the bar code type; if
necessary alter the data.
8304
Bar c. plain-copy
Status
Error during integration of the plain-copy line in the bar code sample.
Measure
Check whether the transmitted data is permitted for the bar code type; if
necessary alter the data.